Download CoTrust PLC Programming Software (MagicWorks – New Version)

If you work with COTRUST automation hardware, you'll need MagicWorks, the manufacturer's dedicated programming software for the CoTrust PLC lineup. This guide covers what MagicWorks does, which CoTrust hardware it supports, and where to get the official software directly from COTRUST.

What Is CoTrust MagicWorks?

COTRUST Technologies is a Chinese industrial automation manufacturer founded in 2003, producing PLCs, HMIs, servo drives, variable frequency drives (VFDs), and remote I/O modules. MagicWorks is the company's proprietary software suite used to program and configure this hardware — comparable in role to how Siemens engineers use STEP 7, or how Mitsubishi engineers use GX Works.

MagicWorks isn't a single tool but a family of applications, each covering a different part of the automation stack:

• MagicWorks PLC — programming environment for CoTrust's CTSC, CTH200, CTH300, and CTMC series PLCs
• MagicWorks HMI — configuration software for CoTrust HMI panels and text displays
• MagicWorks SCADA — a function block within MagicWorks HMI for supervisory monitoring and control
• MagicWorks Tuner — servo and drive tuning software, with OPC support for data exchange

Key Features

• Support for multiple programming languages: ladder diagram (LAD), instruction list (STL), and sequence function diagram (FBD)
• Parameter configuration wizards for faster servo and drive setup
• Real-time monitoring of servo status for quicker fault diagnosis
• Compatibility across CoTrust's full PLC range: CTSC-100, CTSC-200, CTH200, CTH300, and CTMC series
• Integrated HMI/SCADA configuration alongside PLC logic development

Supported Hardware

MagicWorks PLC is built to work across COTRUST's controller lineup, including:

• CTSC-100 and CTSC-200 series PLCs
• CTH200 and CTH300 series PLCs
• CTMC series motion controllers
• CoTrust servo drives and frequency converters (via MagicWorks Tuner)
• CoTrust HMI and text display panels (via MagicWorks HMI)

Where to Download MagicWorks

Since MagicWorks is proprietary software tied to CoTrust hardware, the safest and most reliable source is COTRUST's own download portal. Getting it directly from the manufacturer means you're on the correct version for your hardware and avoid the security risks of third-party file hosts.

• Official Download Portal: https://en.co-trust.com/Download/index.html — select your product type (PLC, Servo, HMI, etc.) and model to get the matching software build
• MagicWorks PLC Product Page: https://en.co-trust.com/Products/MagicWorks/PLC/desc.html
• Support Contact: sales@co-trust.com or the CoTrust customer service hotline listed on their site

If you can't find the exact version you need on the portal, COTRUST's technical support team can point you to it directly — a safer route than downloading from unofficial mirrors.

 Download via GoogleDrive 

       >>> Download MagicWorks V2.31 CoTrust PLC Programming Software

                    

Password : plc247.com

Final Thoughts

MagicWorks is the backbone of any CoTrust automation project — without it, you can't program, monitor, or tune the company's PLCs, HMIs, or servo systems. Since it's hardware-specific software, always confirm you're downloading the version matched to your controller model, and pull it from COTRUST's official channels to avoid compatibility issues or bundled malware from third-party sites.